68068537AJ Clock Spring w/ Angle Sensor - Fits 2011-2020 Dodge Journey
Royuan OEM-grade Clock Spring (OE:68068537AJ) with integrated angle sensor fits all 2011-2020 Dodge Journey models. This essential safety component ensures stable signal transmission for airbags, horns and steering wheel controls while providing precise steering angle data to vehicle stability systems. Batch tested, ISO/TS 16949 certified, 12-month warranty, ideal for auto parts distributors & Dodge repair shops.
Precise Compatibility
| Brand | Model | Year Range | Specifications | Notes |
|---|---|---|---|---|
| Dodge | Journey | 2011-2020 | 68068537AJ | All trims & engine types (2.4L/3.6L) with angle sensor equipped systems |
⚠️ Important Note: This part is ONLY compatible with Dodge Journey 2011-2020 models that have factory-installed steering angle sensors. NOT suitable for non-sensor versions (use 68067552AJ/AK instead) or other Chrysler/Dodge vehicles. Verify your vehicle has stability control/steering angle sensor before purchase.
Product Features & Technical Specifications
🔧 Core Functions
- Dual functionality: Clock spring + integrated steering angle sensor in one compact unit
- Stable airbag circuit signal transmission (critical safety function)
- Supports horn, steering wheel audio/cruise control operations
- Precision angle detection: Provides accurate steering wheel position data to vehicle ECU for stability control, ABS and traction systems
- Full compatibility with vehicle diagnostic systems
✅ Quality Assurance
- 100% batch inspection for electrical continuity and insulation (≥100MΩ)
- Anti-vibration & wear-resistant design for SUV road conditions
- High-conductivity copper conductors + flame-retardant ABS housing
- ≥1 million rotation service life
- Operating temperature: -40°C~+85°C
- ISO/TS 16949 certified, 12-month warranty
🔍 Technical Specifications
- Sensor type: Magnetic angle sensor (AMR/ABR technology) with 14-18 bit resolution
- Interface: 1:1 match with OEM steering column module, plug-and-play installation
- Rotation range: ±3 full turns (meets Journey's steering requirements)
- Connection: Multiple pin configuration (including dedicated angle sensor wires)
- Weight: 0.42kg (slightly heavier than non-sensor versions due to sensor module)
Wholesale Supply Information
- MOQ: 10 units, mixed orders with other clock spring models welcome
- Stock: 3,800+ units in stock for immediate shipment
- Packaging: Shockproof neutral/Royuan-branded packaging, suitable for international logistics
- Contact: Website - www.royuan.ltd | WhatsApp - 86-18766792702
Installation & Precautions
🔧 Installation Steps
- Safety first: Disconnect vehicle battery negative terminal and wait 15 minutes to power down airbag system
- Remove steering wheel airbag module
- Remove steering wheel and column shrouds
- Unplug old clock spring connectors (note wire positions)
- Remove old clock spring from steering column
- Important: Ensure new clock spring is centered before installation (marked with alignment indicators)
- Install new clock spring and secure with mounting screws
- Reconnect all electrical connectors
- Reinstall steering wheel, airbag module and column shrouds
- Reconnect battery
⚠️ Critical Precautions
- DO NOT rotate steering wheel while clock spring is disconnected (risk of damaging internal wiring)
- Sensor calibration required: After installation, start vehicle and turn steering wheel fully left then right to reset angle sensor
- Professional installation is strongly recommended (airbag systems require expertise)
- Verify no error codes are present using diagnostic tool after installation
Common Faults & Solutions
| Fault Symptom | Possible Cause | Solution |
|---|---|---|
| Airbag warning light on | Clock spring circuit breakage | Replace with 68068537AJ |
| Stability control light on | Angle sensor malfunction | Replace with 68068537AJ and recalibrate |
| Steering controls unresponsive | Poor electrical contact | Check connectors or replace clock spring |
| Vehicle pulls to one side | Improper angle sensor calibration | Re-calibrate or replace with properly centered 68068537AJ |
Summary
68068537AJ is the OEM-equivalent clock spring with integrated angle sensor for all 2011-2020 Dodge Journey models. This dual-function component ensures both safe airbag operation and precise steering angle detection for vehicle stability systems. With reliable quality, sufficient stock and competitive pricing, Royuan is your trusted source for Dodge OEM replacement parts.
