Clock Spring 84306-52020 for Toyota RAV4 2000-2005 / Yaris 2000-2005 / Echo 2000-2005 / Corolla / Previa – 2 Pin OEM
Product Description – Clock Spring 84306-52020 for Toyota RAV4 / Yaris / Echo / Corolla / Previa (2 Pin)
🔍 IMPORTANT – PLEASE READ
This OEM clock spring features a 2-pin connector configuration, designed for base models without cruise control or sequential shift . Trim levels and steering wheel options may affect connector pin layout. Always visually compare with your original part. For 100% confirmation, contact us with your VIN.
Direct Fit for Toyota Models
This OEM replacement clock spring is engineered for the following Toyota vehicles based on manufacturer data :
| Model | Years | Notes |
|---|---|---|
| Toyota RAV4 | 2000–2005 | Without cruise control |
| Toyota Echo | 2000–2005 | Base model |
| Toyota Yaris | 2000–2005 | Echo/Yaris (Platz NCP1#) |
| Toyota MR2 Spyder | 2000–2005 | Without sequential shift |
| Toyota Corolla | Verify | User-provided – verify with original part |
| Toyota Previa | Verify | User-provided – verify with original part |
Compatible OEM Numbers: 84306-52020 (primary). Official Toyota part name: "Cable Sub Assembly Spir" .
2-Pin Configuration
This clock spring features a 2-pin connector configuration, specifically designed for base models without additional steering wheel controls. Based on Toyota parts catalog data, this part is specified for:
- ✅ MR2 Spyder – without sequential shift
- ✅ RAV4 – without cruise control
- ✅ Echo – base model
- ✅ Toyota Platz (Yaris/Echo) – NCP1# chassis, 08.1999–12.2002
Why Your Clock Spring Matters
The clock spring (also called spiral cable or airbag rotor) is a critical safety component located behind the steering wheel. A faulty clock spring may trigger the airbag warning light, cause horn failure, or make multifunction buttons unresponsive . It maintains continuous electrical connection as the wheel turns, enabling :
- ✅ Proper airbag (SRS) deployment
- ✅ Reliable horn operation
⚠️ IMPORTANT SAFETY NOTE
A worn or broken clock spring can lead to airbag malfunction. Since it is responsible for two safety devices (airbag and horn), prompt replacement is highly recommended .
Installation Tip: Always disconnect the battery before starting, ensure the front wheels are straight, and keep the centering clip in place until reassembly. Do NOT judge fitment by vehicle model alone – always compare appearance and pin count.
Quality You Can Trust
- 🔹 High-Purity Copper Ribbon: Stable, interference-free signal transmission
- 🔹 Flame-Retardant Housing: Meets stringent automotive safety standards
- 🔹 Rigorous Testing: 300,000-cycle endurance test (-40°C to +85°C)
- 🔹 Centering Clip Included: Do NOT remove until fully installed
- 🔹 Warranty: 1-year against manufacturing defects
Package Includes: 1 x Clock Spring Assembly (with centering clip), 1 x Installation Guide (available upon request)
