Clock Spring 84308-0R030 84308-07010 for Toyota Camry Highlander Corolla RAV4 2019-2021 Lexus ES – Without Angle Sensor – OEM-Ruian Rongyuan Auto Parts Co.,LTD.
ꁆ ꁇ

Clock Spring 84308-0R030 84308-07010 for Toyota Camry Highlander Corolla RAV4 2019-2021 Lexus ES – Without Angle Sensor – OEM

Direct replacement OEM clock spring for Toyota Camry/Highlander/Corolla (2020-2021), RAV4 (2019-2021), and Lexus ES250/ES300h/ES350 (2019-2021). OEM: 84308-0R030, 84308-07010. Clock spring ONLY – does NOT include steering angle sensor (transfer from original if equipped). Restores airbag (SRS), horn, and steering wheel controls. High-strength copper ribbon, flame-retardant housing. 300,000-cycle test (-40°C to +85°C). Includes centering clip. CE/ISO9001 certified. 1-year warranty.

Product Description – Clock Spring 84308-0R030 / 84308-07010 for Toyota / Lexus (Without Angle Sensor)

🔍 IMPORTANT – PLEASE READ

This OEM clock spring is designed for late-model Toyota and Lexus vehicles equipped with multi-function steering wheels.

⚠️ CRITICAL: This listing is for the clock spring ONLY. It does NOT include the steering angle sensor. If your vehicle is equipped with VSC, LKA, or other driver assist systems, you must carefully detach the angle sensor from your original clock spring and reattach it to this new unit [citation:1][citation:3].

OEM Cross Reference: This part is available under multiple OEM numbers including 84308-0R030, 84308-07010. Official Toyota/Lexus part name: "Cable Set Spiral W" or "Spiral Cable" [citation:1][citation:3].

Always visually compare pin count, connector shape, and appearance with your original part before ordering. For 100% confirmation, contact us with your VIN.

Direct Fit for Toyota & Lexus Models
Based on manufacturer data from official Toyota and Lexus parts catalogs, this clock spring fits the following vehicles [citation:1][citation:3]:

Make Model Years Notes
Toyota Camry 2020–2021 All trims [citation:1]
Toyota Highlander 2020–2021 With/without heated wheel [citation:1]
Toyota Corolla 2020–2021 With steering heater [citation:1]
Toyota RAV4 2019–2021 Canada/US built [citation:1]
Lexus ES250 2019–2021 All trims [citation:3]
Lexus ES300h 2019–2021 USA built [citation:3]
Lexus ES350 2019–2021 All trims [citation:3]

Key Features & Functions
The clock spring (spiral cable) maintains continuous electrical connection between the steering wheel and vehicle systems, enabling [citation:1][citation:3]:

  • ✅ Airbag (SRS) system – critical safety component
  • ✅ Horn operation
  • ✅ Steering wheel audio, phone, and cruise controls
  • ✅ Steering wheel heater (if equipped) [citation:1]

Note: This clock spring does NOT include the steering angle sensor. If your vehicle has stability control (VSC) or driver assist features, the angle sensor must be transferred from your original unit.

Why Your Clock Spring Matters
A faulty clock spring may trigger the airbag warning light, cause horn failure, or make steering wheel controls unresponsive. In modern Toyota/Lexus vehicles with advanced safety features, proper clock spring function is essential [citation:1][citation:3].

⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS

Before Installation: Disconnect the battery negative terminal and wait at least 5 minutes for the airbag system to discharge.

Angle Sensor Transfer (if applicable): If your original clock spring has an attached angle sensor, carefully unclip it and mount it onto the new clock spring in the same orientation.

Centering: Ensure front wheels are perfectly straight. The new clock spring comes with a centering clip – do NOT remove this clip until the clock spring is fully installed and the steering wheel is in position. Rotating the clock spring without the clip can damage the internal ribbon cable.

Verification: Always verify that the replacement part matches your original in connector type, pin count, and physical appearance. Professional installation recommended.

Post-Installation: After installation, verify all steering wheel functions (horn, controls, airbag light) operate correctly. If the SRS light remains on, diagnostic scanning may be required.

Quality You Can Trust

  • 🔹 High-Purity Copper Ribbon: Stable, interference-free signal transmission for all circuits
  • 🔹 Flame-Retardant Housing: Meets stringent automotive safety standards
  • 🔹 Rigorous Testing: 300,000-cycle endurance test (-40°C to +85°C)
  • 🔹 Centering Clip Included: Do NOT remove until fully installed
  • 🔹 Warranty: 1-year against manufacturing defects (minimum 12 months manufacturer warranty) [citation:1]

Package Includes: 1 x Clock Spring Assembly (with centering clip), 1 x Installation Guide (available upon request)