ꁆ ꁇ

Clock Spring 1K0959653C 8 Pins for VW Golf Jetta Tiguan Touran Audi A3 SEAT Leon Skoda Octavia

Direct replacement clock spring with 8-pin connector for Volkswagen (Touran 2003-2010, Golf/Caddy 2004-2010, GTI 2005-2010, Rabbit/Eos 2005-2009, Jetta 2006-2010, Tiguan 2008-2010), Audi A3 (2004-2007), SEAT (Altea 2004-2010, Toledo 2005-2009, Leon 2006-2010), and Skoda Octavia (2004-2009). Replaces OEM #1K0959653C. Essential component for driver airbag (SRS), horn and steering wheel controls. High-strength copper ribbon, flame-retardant housing.

Product Description – Clock Spring 1K0959653C 8 Pins for VW / Audi / SEAT / Skoda

🔍 IMPORTANT – PLEASE READ

This clock spring features an 8-pin connector and is designed to fit a wide range of Volkswagen, Audi, SEAT and Skoda models from the mid-2000s to early 2010s.

⚠️ CRITICAL: Always visually compare connector shape, pin configuration (8 pins) and appearance with your original part before ordering. For 100% confirmation, please contact us with your VIN.

OEM Reference: 1K0959653C (primary), also referenced as 1K0 959 653 C, 1K5 953 503 EC, 1K5 953 503 FP [citation:2][citation:6].

Direct Fit for Volkswagen / Audi / SEAT / Skoda Models
Based on compatibility research, this 8-pin clock spring fits the following vehicles [citation:1][citation:2][citation:6]:

Make Model Years Notes
Volkswagen Touran 2003–2010 5P/1T chassis
Volkswagen Golf / Caddy 2004–2010 Mk5/Mk6 generation [citation:4]
Volkswagen GTI 2005–2010 Mk5 [citation:1]
Volkswagen Rabbit / Eos 2005–2009 North American market [citation:1][citation:9]
Volkswagen Jetta 2006–2010 Mk5 [citation:1][citation:8][citation:9]
Volkswagen Tiguan 2008–2010 5N chassis [citation:8][citation:9]
Audi A3 2004–2007 8P chassis [citation:6]
SEAT Altea 2004–2010 5P chassis [citation:6]
SEAT Toledo 2005–2009 5P chassis
SEAT Leon 2006–2010 1P chassis [citation:6]
Skoda Octavia 2004–2009 1Z chassis [citation:6]

Technical Specifications
This clock spring has the following characteristics based on supplier data [citation:2][citation:6]:

  • 🔹 Number of Connectors / Ports: 8 pins (8-pin connector configuration)
  • 🔹 Function: Clock spring, airbag squib
  • 🔹 Placement on Vehicle: Steering column, behind steering wheel
  • 🔹 OE Number Cross Reference: 1K0959653C, 1K0 959 653 C, 1K5 953 503 EC, 1K5 953 503 FP, 8P0907137AD [citation:1][citation:6]

Key Functions
The clock spring maintains continuous electrical connection between the steering wheel and vehicle systems, enabling [citation:1][citation:5][citation:9]:

  • ✅ Airbag (SRS) system – critical safety component
  • ✅ Horn operation
  • ✅ Steering wheel audio controls (if equipped)
  • ✅ Cruise control switches (if equipped)

Signs of Failure
A faulty clock spring may exhibit the following symptoms [citation:5][citation:9]:

  • ⚠️ Airbag warning light illuminates on dashboard
  • 📢 Horn does not function
  • 🎛️ Steering wheel-mounted controls become unresponsive
  • 🚨 In critical cases, driver airbag may not deploy in a collision

⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS

Before Installation: Disconnect the battery negative terminal and wait at least 5 minutes for the airbag system to discharge.

Centering: Ensure front wheels are perfectly straight. The new clock spring comes with a centering clip – do NOT remove this clip until the clock spring is fully installed and the steering wheel is in position. Rotating the clock spring without the clip can damage the internal ribbon cable [citation:5].

Installation Notes: This 8-pin clock spring is designed for vehicles with specific steering wheel configurations. Verify that your original part has 8 pins before ordering [citation:2].

Verification: Always verify that the replacement part matches your original in connector type and pin configuration. Professional installation recommended [citation:5].

Post-Installation: After installation, verify horn function, steering wheel controls, and ensure the airbag warning light extinguishes correctly.

Quality You Can Trust

  • 🔹 High-Purity Copper Ribbon: Stable, interference-free signal transmission
  • 🔹 Flame-Retardant Housing: Meets stringent automotive safety standards
  • 🔹 Rigorous Testing: 300,000-cycle endurance test (-40°C to +85°C)
  • 🔹 Centering Clip Included: Do NOT remove until fully installed
  • 🔹 Warranty: 1-year against manufacturing defects

Package Includes: 1 x Clock Spring Assembly (with centering clip), 1 x Installation Guide (available upon request)