Clock Spring 7701072088 251679 for Renault Trafic II 2006-2014 Dacia Logan 2006- Sandero
Product Description – Clock Spring 7701072088 / 251679 for Renault Trafic II / Dacia Logan / Sandero
🔍 IMPORTANT – PLEASE READ
This clock spring (also known as airbag spiral cable or airbag squib) is a critical safety component located behind the steering wheel. Its role is to maintain continuous electrical connection for the driver's airbag (SRS), horn, and steering wheel controls as the steering wheel turns.
⚠️ CRITICAL: Always visually compare the connector shape, pin configuration, and appearance with your original part before ordering. For 100% confirmation, please contact us with your VIN.
OEM Cross Reference: This part replaces OEM numbers including 7701072088, 251679.
Direct Fit for Renault & Dacia Models
Based on compatibility research, this clock spring fits the following vehicles:
| Make | Model | Years | Chassis / Notes |
|---|---|---|---|
| Renault | Trafic II (Box / FL) | 2006–2014 | 2.0 16V, 2.0 dCi, 2.5 dCi variants |
| Renault | Trafic II (Bus / JL) | 2006–2014 | Passenger van variants |
| Renault | Trafic II (Platform / EL) | 2006–2014 | Chassis cab variants |
| Dacia | Logan (LS_) | 2006– | Sedan, 1.2 / 1.4 / 1.6 / 1.5 dCi |
| Dacia | Logan MCV (KS_) | 2007– | Estate/Wagon variant |
| Dacia | Logan Express (FS_) | 2009– | Panel van variant |
| Dacia | Logan Pickup (US_) | 2008– | Pickup variant |
| Dacia | Sandero | 2008– | Hatchback, 1.2 / 1.4 / 1.6 / 1.5 dCi |
Technical Specifications
- 🔹 Function: Clock spring / Airbag spiral cable / Airbag squib
- 🔹 Placement on Vehicle: Steering column, behind steering wheel
- 🔹 Weight: Approximately 0.34 kg
- 🔹 OE Numbers: 7701072088, 251679
Key Functions
The clock spring maintains continuous electrical connection between the steering wheel and vehicle systems, enabling:
- ✅ Airbag (SRS) system activation – critical safety component
- ✅ Horn operation
- ✅ Steering wheel controls (if equipped)
Signs of Failure
A faulty clock spring may exhibit the following symptoms:
- ⚠️ Airbag warning light illuminates on dashboard
- 📢 Horn does not function
- 🎛️ Steering wheel-mounted controls become unresponsive
- 🚨 In critical cases, driver airbag may not deploy in a collision
⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS
Before Installation: Disconnect the battery negative terminal and wait at least 5 minutes for the airbag system to discharge.
Centering: Ensure front wheels are perfectly straight. The new clock spring comes with a centering clip – do NOT remove this clip until the clock spring is fully installed and the steering wheel is in position. Rotating the clock spring without the clip can damage the internal ribbon cable.
Verification: Always verify that the replacement part matches your original in connector type and pin configuration. To confirm compatibility, contact us with your VIN.
Post-Installation: After installation, verify horn function, steering wheel controls, and ensure the airbag warning light extinguishes correctly.
Professional Installation: Due to the critical safety nature of this component, installation by a qualified technician is strongly recommended.
Quality You Can Trust
- 🔹 High-Purity Copper Ribbon: Stable, interference-free signal transmission
- 🔹 Flame-Retardant Housing: Meets stringent automotive safety standards
- 🔹 Rigorous Testing: 300,000-cycle endurance test (-40°C to +85°C)
- 🔹 Centering Clip Included: Do NOT remove until fully installed
- 🔹 Warranty: 1-year warranty
Package Includes: 1 x Clock Spring Assembly (with centering clip), 1 x Installation Guide (available upon request)
