Clock Spring PW950820 3 Wire for Proton Gen2 Waja Saga Persona – Airbag Spiral Cable-Ruian Rongyuan Auto Parts Co.,LTD.
ꁆ ꁇ

Clock Spring PW950820 3 Wire for Proton Gen2 Waja Saga Persona – Airbag Spiral Cable

Direct replacement clock spring (airbag spiral cable) with 3-wire configuration for Proton models (Gen2, Waja, Saga, Persona, etc.). Replaces OEM #PW950820. Essential component for driver airbag (SRS) and horn functions. 3-wire configuration for vehicles WITHOUT multifunction steering wheel controls. High-strength copper ribbon, flame-retardant housing. 300,000-cycle test (-40°C to +85°C). CE/ISO9001 certified. 1-year warranty. Verify connector compatibility before ordering.

Product Description – Clock Spring PW950820 3 Wire for Proton Models

🔍 IMPORTANT – PLEASE READ

This clock spring features a 3-wire configuration and is designed for Proton vehicles without multifunction steering wheel controls (cruise control, audio controls, etc.). It is specifically intended for base models where only airbag and horn functions are required.

⚠️ CRITICAL: Always visually compare the connector shape, wire count (3 wires), and appearance with your original part before ordering. For 100% confirmation, please contact us with your VIN and photos of your original clock spring.

OEM Cross Reference: This part replaces OEM numbers including PW950820 [citation:1].

Return Policy: This electrical component is not returnable once installed. Please ensure compatibility before purchase.

Direct Fit for Proton Models
Based on compatibility research, this 3-wire clock spring fits the following vehicles [citation:1]:

Make Model Years Notes
Proton Gen2 2004– 3-wire configuration – base models [citation:1]
Proton Waja 2000–2011 3-wire configuration – verify with original part
Proton Saga / BLM / FLX 2008– 3-wire configuration – verify with original part
Proton Persona 2007– 3-wire configuration – verify with original part

Technical Specifications

  • 🔹 Brand: ROYUAN – Premium aftermarket manufacturer
  • 🔹 Function: Clock spring / Airbag spiral cable
  • 🔹 Wire Configuration: 3 wires [citation:1]
  • 🔹 Placement on Vehicle: Steering column, behind steering wheel [citation:2]
  • 🔹 Material: High-strength copper ribbon, ABS plastic housing, TPEE/Rubber [citation:1]
  • 🔹 Colour: Black / Yellow / Green [citation:1]
  • 🔹 OE Number: PW950820

Key Functions
The clock spring maintains continuous electrical connection between the steering wheel and vehicle systems, enabling [citation:2]:

  • ✅ Airbag (SRS) system – critical safety component
  • ✅ Horn operation
  • ✅ Basic steering wheel controls (if equipped)

Note: This 3-wire clock spring is for vehicles WITHOUT multifunction steering wheel controls (audio, cruise control).

Signs of Failure
A faulty clock spring may exhibit the following symptoms [citation:2]:

  • ⚠️ Airbag warning light illuminates on dashboard
  • 📢 Horn does not function
  • 🔊 Horn goes off continuously when starting the vehicle
  • 🎛️ Steering wheel-mounted controls become unresponsive
  • ⚡ Electrical system malfunctions
  • 🚨 In critical cases, airbag may deploy prematurely or fail to deploy in a collision [citation:2]

⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS

Before Installation: Disconnect the battery negative terminal and wait at least 5 minutes for the airbag system to discharge. The clock spring contains the wiring for the horn and airbag [citation:2].

Centering: Ensure front wheels are perfectly straight. The new clock spring comes with a centering clip – do NOT remove this clip until the clock spring is fully installed and the steering wheel is in position. Rotating the clock spring without the clip can damage the internal ribbon cable.

Verification: This 3-wire clock spring is designed for base models without multifunction steering wheel controls. Count the wires on your original part (should be 3 wires) before ordering. For 100% confirmation, contact us with your VIN and photos of your original clock spring.

Post-Installation: After installation, verify horn function and ensure the airbag warning light extinguishes correctly. If the light remains on, diagnostic scanning may be required [citation:2].

Professional Installation: Due to the critical safety nature of this component, installation by a qualified technician is strongly recommended [citation:2].

Quality You Can Trust

  • 🔹 High-Purity Copper Ribbon: Stable, interference-free signal transmission
  • 🔹 Flame-Retardant Housing: Meets stringent automotive safety standards
  • 🔹 Rigorous Testing: 300,000-cycle endurance test (-40°C to +85°C)
  • 🔹 Centering Clip Included: Do NOT remove until fully installed
  • 🔹 Warranty: 1-year warranty

Package Includes: 1 x Clock Spring Assembly (with centering clip), 1 x Installation Guide (available upon request)