Clock Spring 77900-3V4-A81 for Honda Accord 1993-1998 – Airbag Spiral Cable-Ruian Rongyuan Auto Parts Co.,LTD.
ꁆ ꁇ

Clock Spring 77900-3V4-A81 for Honda Accord 1993-1998 – Airbag Spiral Cable

Direct replacement clock spring (airbag spiral cable) for Honda Accord (1993-1998). Replaces OEM #77900-3V4-A81, 779003V4A81. Essential component for driver airbag (SRS), horn, and steering wheel controls. High-strength copper ribbon, flame-retardant housing. 300,000-cycle test (-40°C to +85°C). Includes centering clip. CE/ISO9001 certified. 1-year warranty. Verify connector compatibility before ordering.

Product Description – Clock Spring 77900-3V4-A81 for Honda Accord (1993-1998)

🔍 IMPORTANT – PLEASE READ

This clock spring (also known as airbag spiral cable or airbag squib) is a critical safety component located behind the steering wheel. Its role is to maintain continuous electrical connection for the driver's airbag (SRS) and horn as the steering wheel turns .

⚠️ CRITICAL: Always visually compare the connector shape, pin configuration, and appearance with your original part before ordering. For 100% confirmation, please contact us with your VIN.

OEM Cross Reference: This part replaces OEM numbers including 77900-3V4-A81, 779003V4A81 .

Return Policy: This electrical component is not returnable once installed. Please ensure compatibility before purchase.

Direct Fit for Honda Models
Based on compatibility research, this clock spring fits the following vehicles :

Make Model Years Chassis / Notes
Honda Accord 1993–1998 5th generation (CD/CE chassis), verify with original part
Honda Accord 1998 6th generation (CG/CH chassis) – verify with original part

Technical Specifications

  • 🔹 Brand: ROYUAN – Premium aftermarket manufacturer
  • 🔹 Function: Clock spring / Airbag spiral cable / Airbag squib
  • 🔹 Placement on Vehicle: Steering column, behind steering wheel
  • 🔹 Material: High-strength copper ribbon, flame-retardant ABS plastic housing
  • 🔹 OE Number: 77900-3V4-A81

Key Functions
The clock spring maintains continuous electrical connection between the steering wheel and vehicle systems, enabling:

  • ✅ Airbag (SRS) system activation – critical safety component
  • ✅ Horn operation

Signs of Failure
A faulty clock spring may exhibit the following symptoms:

  • ⚠️ Airbag warning light illuminates on dashboard
  • 📢 Horn does not function
  • 🚨 In critical cases, driver airbag may not deploy in a collision

⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS

Before Installation: Disconnect the battery negative terminal and wait at least 5 minutes for the airbag system to discharge .

Centering: Ensure front wheels are perfectly straight. The new clock spring comes with a centering clip – do NOT remove this clip until the clock spring is fully installed and the steering wheel is in position. Rotating the clock spring without the clip can damage the internal ribbon cable .

Installation Steps: Remove steering wheel and airbag module, disconnect old clock spring, install new unit, turn the clock spring rotor to the end and then back approximately 2.5 turns to center, reconnect all electrical connections .

Verification: Always verify that the replacement part matches your original in connector type and pin configuration. For 100% confirmation, contact us with your VIN.

Post-Installation: After installation, verify horn function and ensure the airbag warning light extinguishes correctly .

Professional Installation: Due to the critical safety nature of this component, installation by a qualified technician is strongly recommended.

Quality You Can Trust

  • 🔹 High-Purity Copper Ribbon: Stable, interference-free signal transmission
  • 🔹 Flame-Retardant Housing: Meets stringent automotive safety standards
  • 🔹 Rigorous Testing: 300,000-cycle endurance test (-40°C to +85°C)
  • 🔹 Centering Clip Included: Do NOT remove until fully installed
  • 🔹 Warranty: 1-year warranty

Package Includes: 1 x Clock Spring Assembly (with centering clip), 1 x Installation Guide (available upon request)