Which vehicles is this clock spring compatible with?

It is designed for Jeep Grand Cherokee (2011–2013, WK2 chassis).

What OEM number does this product replace?

It directly replaces OEM part number 10008742. It may also be known as 870C.

What are the symptoms of a bad clock spring?

Common signs include an illuminated airbag warning light, non-functioning horn, unresponsive steering wheel buttons, or a clicking noise when turning the wheel.

Can I install it myself?

Yes, if you have basic mechanical skills. Always disconnect the battery first and ensure the front wheels are straight. The included centering clip helps keep the spring aligned during installation. If unsure, consult a professional.

Does it work in extreme temperatures?

Yes, it is tested for reliable operation from -40°C to +85°C.

Yes, we offer a 1-year warranty against manufacturing defects.

ꁆ ꁇ

Clock Spring 95486112 96827005 for Chevrolet Aveo 2008-2011 – Airbag Spiral Cable

Direct replacement clock spring (airbag spiral cable) for Chevrolet Aveo (2008-2011). Replaces OEM #95486112, 96827005. Essential component for driver airbag (SRS), horn, and steering wheel controls. High-strength copper ribbon, flame-retardant housing. 300,000-cycle test (-40°C to +85°C). Includes centering clip. CE/ISO9001 certified. 1-year warranty. Verify connector compatibility before ordering.

Product Description – Clock Spring 95486112 / 96827005 for Chevrolet Aveo (2008-2011)

🔍 IMPORTANT – PLEASE READ

This clock spring (also known as airbag spiral cable, contact coil, or airbag squib) is a critical safety component located behind the steering wheel. Its role is to maintain continuous electrical connection for the driver's airbag (SRS), horn, and steering wheel controls as the steering wheel turns .

⚠️ CRITICAL: Always visually compare the connector shape, pin configuration, and appearance with your original part before ordering. For 100% confirmation, please contact us with your VIN .

OEM Cross Reference: This part replaces OEM numbers including 95486112, 96827005 .

Return Policy: This electrical component is not returnable once installed. Please ensure compatibility before purchase.

Direct Fit for Chevrolet Models
Based on compatibility research, this clock spring fits the following vehicles :

Make	Model	Years	Chassis / Notes
Chevrolet	Aveo	2008–2011	T200 / T250 chassis – verify with original part

Technical Specifications

🔹 Brand: ROYUAN – Premium aftermarket manufacturer
🔹 Function: Clock spring / Airbag spiral cable / Airbag squib
🔹 Placement on Vehicle: Steering column, behind steering wheel
🔹 Material: High-strength copper ribbon, flame-retardant ABS plastic housing
🔹 OE Numbers: 95486112, 96827005

Key Functions
The clock spring maintains continuous electrical connection between the steering wheel and vehicle systems, enabling:

✅ Airbag (SRS) system activation – critical safety component
✅ Horn operation
✅ Steering wheel audio controls (if equipped)
✅ Cruise control switches (if equipped)

Signs of Failure
A faulty clock spring may exhibit the following symptoms :

⚠️ Airbag warning light illuminates on dashboard
📢 Horn does not function
🎛️ Steering wheel-mounted controls become unresponsive
🔊 Clicking or grinding noise when turning the steering wheel
🚨 In critical cases, driver airbag may not deploy in a collision

⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS

Before Installation: Disconnect the battery negative terminal and wait at least 1 minute for the airbag system to discharge . The SIR system maintains reserved energy supply for up to 2 minutes after disconnecting power .

Steering Wheel Alignment: Ensure front wheels are pointing straight ahead before beginning work .

Centering: The new clock spring comes with a centering clip – do NOT remove this clip until the clock spring is fully installed and the steering wheel is in position. Rotating the clock spring without the clip can damage the internal ribbon cable . To center the clock spring, turn the rotor to the end stop in one direction, then rotate back approximately 2.5 turns to the center position .

Installation Steps: Remove steering wheel and airbag module, disconnect the old clock spring, install the new unit, reconnect all electrical connections .

Verification: Always verify that the replacement part matches your original in connector type and pin configuration. For 100% confirmation, contact us with your VIN .

Post-Installation: After installation, verify horn function, steering wheel controls, and ensure the airbag warning light extinguishes correctly . If the light remains on, an OBDII scanner can help diagnose the issue .

Professional Installation: Due to the critical safety nature of this component, installation by a qualified technician is strongly recommended .

Quality You Can Trust

🔹 High-Purity Copper Ribbon: Stable, interference-free signal transmission
🔹 Flame-Retardant Housing: Meets stringent automotive safety standards
🔹 Rigorous Testing: 300,000-cycle endurance test (-40°C to +85°C)
🔹 Centering Clip Included: Do NOT remove until fully installed
🔹 Warranty: 1-year warranty

Package Includes: 1 x Clock Spring Assembly (with centering clip), 1 x Installation Guide (available upon request)