ꁆ ꁇ

Clock Spring 92147955 for Holden Commodore VT VX VU VY WH WK 1997-2004 – 3 Plug with Radio Controls

Direct replacement clock spring (airbag spiral cable) with 3 plugs and radio button controls for Holden Commodore VT, VX, VU, VY, WH, WK (1997-2004). Replaces OEM #92147955, 34406701. Essential component for driver airbag (SRS), horn, radio controls, and cruise control. 6-wire configuration. High-strength copper ribbon, flame-retardant housing. 300,000-cycle test (-40°C to +85°C). Includes centering clip. CE/ISO9001 certified. 2-year warranty. Verify connector compatibility before ordering.

Product Description – Clock Spring 92147955 for Holden Commodore VT / VX / VU / VY / WH / WK (1997-2004) – 3 Plug with Radio Button Controls

🔍 IMPORTANT – PLEASE READ

This clock spring (airbag spiral cable) is a critical safety component located behind the steering wheel. Its role is to maintain continuous electrical connection for the driver's airbag (SRS), horn, radio volume and station selections, and cruise controls as the steering wheel turns . The clock spring is a coil that retracts and expands inside its housing to maintain electrical continuity for all components on the driver's airbag .

⚠️ CRITICAL: This clock spring features a 3-plug connector configuration (6 wires in one of the plugs) with radio button controls. Always visually compare the connector shape, pin configuration, and appearance with your original part before ordering. For 100% confirmation, please contact us with your VIN .

OEM Cross Reference: This part is available under multiple OEM numbers including 92147955, 34406701 .

Return Policy: This electrical component is not returnable once installed. Please ensure compatibility before purchase.

Direct Fit for Holden Models
Based on compatibility research, this clock spring fits the following vehicles:

Make Model Years Chassis / Notes
Holden Commodore VT 1997–2000 Series I & II, with radio volume buttons
Holden Commodore VX 2000–2002 3.6L / 5.7L, with radio controls, 6-wire plug
Holden Commodore VU 2001–2003 Ute / Pickup, with radio volume buttons
Holden Commodore VY 2002–2004 Sedan, Ute, Wagon, 3.8L / 5.7L
Holden Commodore WH 1999–2003 Statesman / Caprice, with radio controls
Holden Commodore WK 2003–2004 Statesman / Caprice, with radio button controls

Technical Specifications

  • 🔹 Brand: ROYUAN – Premium aftermarket manufacturer
  • 🔹 Function: Clock spring / Airbag spiral cable / Steering roll connector
  • 🔹 Connector Configuration: 3 plugs with radio button control type
  • 🔹 Wire Count: 6-wire configuration (in one of the plugs)
  • 🔹 Placement on Vehicle: Steering column, behind steering wheel (driver side behind airbag module)
  • 🔹 Material: High-strength copper ribbon, flame-retardant ABS plastic housing
  • 🔹 OE Numbers: 92147955, 34406701

Key Functions
The clock spring maintains continuous electrical connection between the steering wheel and vehicle systems, enabling:

  • ✅ Airbag (SRS) system activation – critical safety component
  • ✅ Horn operation
  • ✅ Steering wheel audio controls (volume, station, mode)
  • ✅ Cruise control switches

Signs of Failure
A faulty clock spring may exhibit the following symptoms:

  • ⚠️ Airbag warning light illuminates on dashboard
  • 📢 Horn does not function
  • 🎛️ Steering wheel-mounted controls become unresponsive
  • 🔊 Clicking or grinding noise when turning the steering wheel
  • 🚨 In critical cases, driver airbag may not deploy in a collision

⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS

Before Installation: Disconnect the battery negative terminal and wait at least 5 minutes for the airbag system to discharge. The clock spring should never be disassembled and must be replaced if the airbag has been deployed .

Centering: Ensure front wheels are perfectly straight. The new clock spring comes with a centering clip – do NOT remove this clip until the clock spring is fully installed and the steering wheel is in position. Rotating the clock spring without the clip can damage the internal ribbon cable.

Connector Verification: This clock spring has 3 plugs with radio button control type. The 6-wire configuration refers to the number of wires in one of the wiring plugs. Please count the pins on your original connector before ordering to ensure compatibility .

Compatible Trims: Suits all Holden Commodore VT VX VU VY WH WK S Pack, SV8, SS, SSV, SV6, Commodore Executive, Equip, Berlina, Calais, Lumina, International, and 60th Anniversary models with radio volume buttons on steering wheel .

Post-Installation Note: After replacement, you may need to reset the airbag warning light using a Tech 2 scan tool .

Verification: Always verify that the replacement part matches your original in connector type and pin configuration. For 100% confirmation, contact us with your VIN .

Professional Installation: Due to the critical safety nature of this component, installation by a qualified technician is strongly recommended.

Quality You Can Trust

  • 🔹 High-Purity Copper Ribbon: Stable, interference-free signal transmission
  • 🔹 Flame-Retardant Housing: Meets stringent automotive safety standards
  • 🔹 Rigorous Testing: 300,000-cycle endurance test (-40°C to +85°C)
  • 🔹 Centering Clip Included: Do NOT remove until fully installed
  • 🔹 Warranty: 2-year warranty

Package Includes: 1 x Clock Spring Assembly (with centering clip), 1 x Installation Guide (available upon request)