Clock Spring 96814006 Steering Wheel Airbag Spiral Cable for Holden Chevrolet Epica 2007-2011-Ruian Rongyuan Auto Parts Co.,LTD.
ꁆ ꁇ

Clock Spring 96814006 Steering Wheel Airbag Spiral Cable for Holden Chevrolet Epica 2007-2011

Direct replacement steering wheel airbag spiral cable (clock spring) for Holden Epica / Chevrolet Epica (02/2007-12/2011). Replaces OEM #96814006, 42373009. Essential for driver airbag (SRS), horn, and steering wheel controls. High-strength copper ribbon, flame-retardant housing. 300,000-cycle test (-40°C to +85°C). Includes centering clip. CE/ISO9001 certified. 2-year warranty. Verify connector compatibility before ordering.

Product Description – Steering Wheel Airbag Spiral Cable Clock Spring 96814006 for Holden / Chevrolet Epica (2007-2011)

🔍 IMPORTANT – PLEASE READ

This steering wheel airbag spiral cable (clock spring) is a critical safety component located behind the steering wheel. It maintains continuous electrical connection for the driver's airbag (SRS), horn, and steering wheel controls as the wheel turns.

⚠️ CRITICAL: Always visually compare the connector shape, pin configuration, and appearance with your original part before ordering. For 100% confirmation, please contact us with your VIN.

OEM Cross Reference: 96814006, 42373009.

Return Policy: This electrical component is not returnable once installed. Please ensure compatibility before purchase.

Compatible Vehicles

Make Model Years Notes
Holden (Australia) Epica, EP 02/2007–12/2011 Sedan, 2.0L / 2.5L petrol, with steering wheel controls
Chevrolet Epica 2007–2011 Global export version

Technical Specifications

  • Brand: ROYUAN – Premium aftermarket manufacturer
  • Function: Steering wheel airbag spiral cable / Clock spring
  • Placement: Steering column, behind steering wheel
  • Weight: Approximately 0.30 kg
  • OE Numbers: 96814006, 42373009

Key Functions
✅ Airbag (SRS) system activation – critical safety component
✅ Horn operation
✅ Steering wheel audio controls (volume, station, mode)
✅ Cruise control switches

Signs of Failure
⚠️ Airbag warning light illuminates on dashboard
📢 Horn does not function
🎛️ Steering wheel-mounted controls become unresponsive
🔊 Clicking or grinding noise when turning the steering wheel
🚨 In critical cases, driver airbag may not deploy in a collision

⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS

Before Installation: Disconnect the battery negative terminal and wait at least 30 seconds for the airbag system to discharge.

Centering: Ensure front wheels are perfectly straight. The new clock spring comes with a centering clip – do NOT remove this clip until the clock spring is fully installed and the steering wheel is in position. If recentering is required, turn the rotor clockwise to the stop, then rotate back approximately 2.5 turns to the center position.

Inspection: Check connectors and protective tube for damage, terminals for deformation, and case for damage.

Verification: Always verify that the replacement part matches your original in connector type and pin configuration. For 100% confirmation, contact us with your VIN.

Post-Installation: After installation, verify horn function, steering wheel controls, and ensure the airbag warning light extinguishes correctly.

Professional Installation: Due to the critical safety nature of this component, installation by a qualified technician is strongly recommended.

Quality You Can Trust

  • High-purity copper ribbon – stable, interference-free signal
  • Flame-retardant housing – meets safety standards
  • 300,000-cycle endurance test (-40°C to +85°C)
  • Centering clip included – do not remove early
  • 2-year warranty

Package Includes: 1 x Clock Spring Assembly (with centering clip), installation guide available on request.